Outer Layer Dry Film UV LED Exposure Machine

ManufacturerUV KST
Product NameOuter Layer Dry Film UV LED Exposure Machine
ModelKST-SA6457-WX
ConditionNew
Statusavailable
Posted on03/05/2021

Outer Layer Dry Film UV LED Exposure Machine

ManufacturerUV KST
Product NameOuter Layer Dry Film UV LED Exposure Machine
ModelKST-SA6457-WX
ConditionNew
Statusavailable
Posted on03/05/2021

I want this NOW!

Call 1-603-881-5253

Description

Outer layer dry film UV LED exposure machine double board screen printing PCB exposing machine

Wave Length:Around 365nm
Light Uniformity: >for full range of exposure
Exposure time:Dry film 5s
Running average power:About 2Kw
Alignment system:Automatic system

Technical Specification:

Equipment Type: UV LED Light Exposed System with Automatic alignment feature.
Material of Construction: Stainless Steel Compatible with Clean room environment.
Tray System: Dual tray system (two trays), Glass to Glass for both trays.
Exposing type: Selectable, either for double side or single side exposure.
Function modes: Selectable, either energy or time.
Variable Parameters: Time, Energy or time.
System Features: UV LED Light Source, Dual Exposure frames, CCD Camera (4Nos.) automatic
alignment set-up, Motors for automatic movement & opening, vacuum system , Energy meter
for online measurements of LED Energy, PLC Control touch screen with PC interface, Closed
Loop lamp Chilled water cooling system / AC Cooling unit. All compatible for clean room environment.
Compatibility: For processing Dry Film, Wet Film.
Effective Panel Area: Up to 610 × 710mm max.
Panel Thickness: 70μ min & 4.00mm max.
Line Width resolution: Down to 50 microns (2mil).
Repeatability: Better than ±5microns on glass / glass.

LED Energy : 5mJ/sq cm to 2000mJ/sq cm and facility for setting and adjusting.
Cooling System : Air Cooled / Closed loop lamp cooling system for full intensity continues
Operation, clean room compatible. Vendors to give full details of how cooling is taken care.
Registration: Automatic optical alignments with centering facility using 4 CCD Cameras.
Cameras moveable to full table size. The registration should “full optical”. (Possibility t defect
the hole target covered with dry film optional). Alignment artworks/ artworks ± 15μ̇m,
Alignment artwork / panel ±25μ̇m.
Reference targets: Fiducially and Punched holes.
Registration Accuracy: ±12.5microns (0.5mil) fro art work to art work and ±25.0 microns
(1.0mil) fro art work to panel for both external and internal imaging.
Machine Control: Reputed make PLC based and will provide ladder diagram, software /
Dongle / Hardwork lock if any for editing with necessary interface cable along with the
equipment.
Control Panel with Man Machine Interface (MMI): PLC with Touch Screen.
Exposure Frame Opening : After completion of Exposure operation, Automatic opening of
exposure frame provided.