Back to EquipTech Home page
  EQUIPMENT   |    |  PARTS  |  CONTACT US  |  ABOUT ETI  |  CUSTOM REQUESTS  |  LOGIN  |    HOME >
FTP >

Equipment

Select a Category:     
190 items found.
 View Paged 
Alpha Metals  
Model: Omegameter 600 SMD view details

get a quote
S/N:
24"x24" Test Cell, Operable and Ready to Ship!
Amtech  
Model: Loader/Unloaders view details

get a quote
S/N:
Amtech Accumulator  
Model: 100 Station view details

get a quote
S/N:


Anita Accumulator  
Model: D15k view details

get a quote
S/N: D15k-001-0116
60 panels
1 Phase, 120 VAC, 5 Amps
Argus HASL  
Model: 5124 view details

get a quote
S/N:
New Air Knives, Center Hoist, also available lead free
Argus International IR Tack Dry Cure Oven  
Model: 9624 view details

get a quote
S/N: 1001387
- 3-Zone
- (1999)
- 480V / 3Ph / 75Amps
Argus LPI Spray Coater  
Model: 9324 view details

get a quote
S/N:
with tack dry oven, (1999)
Rebuilt and installed
Argus UV  
Model: 7125 view details

get a quote
S/N:
Single-sided exposure unit, 24" belt, 2 bulb unit
ASI LPI Developer  
Model: 9025 view details

get a quote
S/N:
24 with Cascade Rinses, Ready to ship!

$9,500
The economical 9025 System combines full wet processing abilities with maximum space savings.

Avalon Hot Air Leveler  
Model: 2000 view details

get a quote
S/N:
Lead Free
Barnaby Stackmaster  
Model: 802E view details

get a quote
S/N: 4730
C-Sun  
Model: SMO-7S view details

get a quote
S/N: F9A100
2-Door

Temp Range to 200 Degrees Celsius
C-Sun Bake Oven  
Model: view details

get a quote
S/N:
Double door, all stainless steel
Camtek AOI  
Model: Orion 604 WR view details

get a quote
S/N: 2410
(2000) Call for details!, upgraded
Camtek AOI  
Model: Orion 860 view details

get a quote
S/N: 18558
Vintage: 2007
Includes software
Running!
CCE Developer  
Model: view details

get a quote
S/N: 3262-30
large 7.5 hp pump for main chamber, rinse water usage: 1.6 gpm @30 psi, 2 gpm @ 40 psi, includes dryer. 480v/3 ph/ 60 hz
Cemco Hot Air Leveling  
Model: Quicksilver sm view details

get a quote
S/N:
Tin/Lead ,Max. Panel Size: Standard 2-pin fixturing 610 x 610 mm (24" x 24") ,Optional 610 x 762 mm (24" x 30"), tooling punch available also
Cemco Vertical Hot Air Leveling System  
Model: Quicksilver view details

get a quote
S/N:
Max. Panel Size: Standard 2-pin fixturing 610 x 610 mm (24" x 24")
Optional 610 x 762 mm (24" x 30"), tooling punch available also
Chemcut Alternative Oxide Line  
Model: 547XLi-30" view details

get a quote
S/N:
Module configuration:
-Input
-QRSM -quad rinse module w/ chem chamber
-QRM- quad rinse module
-DSM/LRSM- double spray module w/ large sump (Bond Film Activator) Bond Film Part A Bond Film Part B QRSM DSM/LRSM
-Inspection
-WAM- warm air module
-Exit
Chemcut Clean Line  
Model: 547XLi-30" view details

get a quote
S/N:
Consisting of the following modules: ICDM: Input conveyor drive; TRSM: Large process Micro etch or conditioner heated and cooled; DSM/RSM: Double recirculating rinse; AKM: Fluid head dryer; OCM: Exit. 208 / 240 or 480 volt customer choice.

Chemcut Clean Line  
Model: 547XLi-30" view details

get a quote
S/N:
With the following modules:
Input, Main Chamber, Rinse, Micro, Rinse, Fluid Head Dryer & Exit
Chemcut Conveyor Etch/Strip Line  
Model: GSK-168 view details

get a quote
S/N:
Small foot print

18' long

Set up for ammonia etch

On board controls
Chemcut Deburrer  
Model: 604 view details

get a quote
S/N:
2 brushes w/rinse and dryer, 24'' Capacity.

Dimensions:
Length 90 in (2286 mm)
Width 52 in (1320 mm)
Height 49 in (1245 mm)
Dry Weight 1780 lbs. (808 kg)
Crated: 2470 lbs. (1121 kg

Panel Size
Thick: min 0.015 in (0.38 mm), to max 0.250 in.
(6.35 m)
Chemcut Deburrer  
Model: 605 view details

get a quote
S/N:
24" Double Sided Deburrer- 2 Top Brushes, 2 Bottom Brushes with Oscillation & High Pressure Rinse
System Dimensions: Model 605
108 in (2743 mm)
52 in (1320 mm)
49 in (1245 mm)
38.5 in (978 mm)
Systems Weight:
Dry Weight 2650 lbs. (1203 kg)
Shipping Weight skidded: 3350 lbs. (1521 kg)
Crated: 3650 lbs. (1657 kg)
Thick: min 0.015 in (0.38 mm), to max 0.250 in.
(6.35 m
Chemcut Develop Line  
Model: 547XL-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer & Exit
Chemcut Develop Line  
Model: 547-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer & Exit
Chemcut Develop/Etch/Strip Line  
Model: 547XLi-30" view details

get a quote
S/N:
Like new condition!
Chemcut Developer  
Model: 547XLi-30" view details

get a quote
S/N:
- Input
- Main chamber w/ oscillation
- Rinse recirculating
- Rinse
- Fluid head dryer
- Exit
Chemcut Double Chambered Feric Etch Line  
Model: 547XL-30" view details

get a quote
S/N:
- Input
- Main double chamber etch
- Quad rinse cascade
- Fluid head dryer
- Exit
Chemcut Etching System  
Model: 547XL-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Flood Rinse, Water Rinse Recirculating, Water Rinse, Dryer & Exit
Chemcut Etching System  
Model: 547-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Flood Rinse, Rinse Recirculating, Rinse, Dryer & Exit
Chemcut Ferric Etching System  
Model: 547XL-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Quad Rinse Cascade, Dryer & Exit
Chemcut LPI Developer  
Model: 547XLi-30" view details

get a quote
S/N:
Modules Include:
- Input
- Main chamber with dual pumps
- Double rinse recirculating
- Single rinse cascade
- Fluid head dryer
- Output
Chemcut Preclean Line  
Model: 547XL-30" view details

get a quote
S/N:
with the following modules:
Input, 48" Main Chamber, Single Rinse Recirculating, Single Rinse, Fluid Head Dryer & Exit
Chemcut Preclean Line  
Model: 547XL-30" view details

get a quote
S/N:
With the following configuration:
Input , main chamber, single rinse recirculating, single rinse cascade, fluid head dryer and exit.

Teflon heaters and cooling coil
Chemcut Resist Stripper  
Model: 547XL-30" view details

get a quote
S/N:
Chemcut 547XL-30" Double Chamber Resist Stripper with the following configuration:
Input, double main chamber, single rinse with sump, single rinse cascade, fluid head dryer and exit. Includes filter system
Rebuilt with 120 day parts and labor Warranty , 220 Volt or 480 Volt
Chemcut Scrubber/Rinser/Dryer  
Model: 107 view details

get a quote
S/N:
24" Double Sided
Chemcut Scrubber/Rinser/Dryer  
Model: 107I view details

get a quote
S/N:
24" Double Sided
Chemcut Siamese Main Chambers  
Model: XL, XLi, 547 view details

get a quote
S/N:
ETI has the largest inventory of Siamese main chambers for etching and developing.

All models available ,XLi ,XL,547! We have a total of 10 in stock to customize your etching or developing process.

Rebuilt w/ installation and 6 month warranty. Call with your module configuration requirements. You will save 50% versus new equipment.
Chemcut Strip/Etch/Strip  
Model: 547XLi-30" view details

get a quote
S/N:
Input, main chamber strip with filter, rinse cascade, double rinse cascade, inspection, main chamber etch with osilation, flood rinse, single rinse, inpection, main chamber tin strip, rinse cascade, double cascade, fluid head dryer, exit

We can do any configuration that is required with installation and a FREE 6 month warranty. Call us with your requirements!!
Chemcut Stripper  
Model: 547XLi-30" view details

get a quote
S/N:
Includes the following modules:

Input, Main Chamber, Rinse Recirculating, Rinse, Fluid Head Dryer with Barrel Filter System
Chemcut Tin Stripper  
Model: 547XL-30" view details

get a quote
S/N:
Chemcut 547XL-30" Tin Striper with the following:
Input, Main Chamber with 6 spray bays, top and bottom, & all plastic parts, Single Rinse Recirculating, Single Rinse Cascade, Fluid Head Dryer & Exit.
Fully Rebuilt with 120 Days Parts & Labor Warranty
Chemcut Web Filter  
Model: view details

get a quote
S/N:
Web Filter System
Chemring Reverse Pulse Plate Rectifiers  
Model: CPS 2400D view details

get a quote
S/N:
8-Chemring Reverse Pulse Plate Rectifiers

Model CPS 2400D
Input: 415 v
Output each rectifier: 5v and 2 x 400amp forward and 1 x 2500amp reverse
Includes master control panel w/ PC controller
Water cooled
Year: 1996
Circuit Automation  
Model: TC 120 Conveyorized Oven view details

get a quote
S/N:
- Tack-Dry throughout
- 130 panels/hour
- 30 min. cycle, panels on 1.5" centers
- 60 min. cycle, panels on 0.75" centers
- Maximum operating temperature = 400 F
Circuit Automation  
Model: DP-2500 view details

get a quote
S/N:
Vertical LPI Screener
Circuit Automation LPI Screener  
Model: DP1500-2X view details

get a quote
S/N:
Rebuilt with 100 day warranty
SPECIFICATIONS:

Min Panel Dimension 8" x 12"
Max Size 24" x 30"
Min Thickness 0.010"
Max Thickness 0.250"
Frame Size 37" x 46.6"
Print Speed 1.0 to 10"
Electrical Service 110V/15AMP
Flood Speed 1.0 to 10" inch/sec
Circuit Chemistry Developer  
Model: HIP-AD view details

get a quote
S/N: 2711-20
Developer
Circuit Chemistry Vertical Lab Etcher  
Model: view details

get a quote
S/N:
Great for gold or any type of Etching!
Circuit Chemistry Vertical Spray Developer  
Model: VLP-20 view details

get a quote
S/N:
Vertical Spray Developer
Colight Exposure Unit  
Model: DMVL-1630 8 kW view details

get a quote
S/N:
Double drawer exposure units.
Mylar frame
to be rebuilt with full warranty
Colight Exposure Unit  
Model: DMVL-1530 view details

get a quote
S/N: 74032600
5kw, Double Drawer, w/Air Conditioner Unit, Set up With CA Picard Pin Lam System, Serial # 74032600
Comac  
Model: D224 view details

get a quote
S/N:
Comac 24'' table top dryer, in stock & ready to ship,
Price $3,500 or $2,500.00 exchange program.
Corema  
Model: 100 Station Accumulator view details

get a quote
S/N:
Corema  
Model: 90˚ Turn view details

get a quote
S/N:
Dupont Drawer Vacuum Laminator  
Model: DVL-24 view details

get a quote
S/N:
Vacuum Laminator
DuPont Hot Roll Laminator  
Model: HRL-24 view details

get a quote
S/N:
24'' laminator with LC 2400 cleaner unit.

We have DuPont temperature control boards in stock and ready to ship.
Call for prices and/or exchange program.
Dynachem  
Model: Diazo Developer view details

get a quote
S/N:
24"
Dynachem Auto Cut Sheet Laminator  
Model: 1600-D view details

get a quote
S/N: 06203208
Load/Unload, Auto Centering, Allen Bradley PLC Controller, 30'' Capacity, (1999)
Dynachem Laminator  
Model: 1600 IV 30 view details

get a quote
S/N:
Automatic, Thin Panel Option (1998)
MAKE OFFER
Dynachem Preheater  
Model: 800 view details

get a quote
S/N:
Dynachem Vacuum Laminator  
Model: 724 view details

get a quote
S/N:
Rebuilt Vacuum Pump and New Seals
Dynamotion Drill  
Model: Smart Drill view details

get a quote
S/N: M103
1- 125k Air Bearing Spindle, Sieb & Meyer Controller, BBD's & TMS, 2 available
EIDSCHUN Accumulator  
Model: E90t view details

get a quote
S/N: 101332
110 VAC, 60 Hz, 1Ph, 3 Amps
Eidschun ASI Developer  
Model: Ninety 25 view details

get a quote
S/N:
24" Develop Line with the following modules:

Input, Main Chamber, Double Rinse, Dryer & Exit
Eidschun Conveyor  
Model: E10 view details

get a quote
S/N:
-30" wide
-33" long
-115 volt
2 available
ESI  
Model: HDI 5330 view details

get a quote
S/N:
2008 ESI HDI laser drill
this machine has minimal hours on the laser head
JDSU Q 302 laser head
ESI Accumulator  
Model: 312 view details

get a quote
S/N: 20330
Year: 7-98
ESI Accumulator  
Model: 100 Station view details

get a quote
S/N:


ESI UV Yag Laser  
Model: 5200 view details

get a quote
S/N:
Completely gone through
Software: 4.2
Rebuilt VO3 laser rail, includes a 6 month warranty
Machine comes with installation and training (North America only)
Everett Charles Bare Board Tester  
Model: 9090 view details

get a quote
S/N: T-9090-187
Double Sided, (1999), Grid Size: 10" x 19" , Touch Screen Controls & Maintenance Cart, full diagnostic check prior to shipping
Excellon  
Model: Concept Drill view details

get a quote
S/N:
Year MFG: 2004

Single 120K RPM spindle

Spindle model: 1473-08
Excellon Drill  
Model: Uniline 2000 view details

get a quote
S/N: 4280
Single Spindle Drilling Machine w/ 170,000 rpm Air Bearing Spindle, 120 Bits Per/Cartridge Tool Management, Refrigerated Air Dryer, Sun Sparc Workstation w/ Sun Monitor & Keyboard (1996) 230 Volts, 50/60 Hz., 20 Amps, Single Phase
Excellon Driller  
Model: Mark VI-E view details

get a quote
S/N:
TMS, BBD's, 110K RPM Westwind Spindles, 4 Head, CNC-6 Controller
Excellon Driller  
Model: EX 200 view details

get a quote
S/N:
2 Heads, 80k Bearing Spindles, 9 Tool Changers per Station, CNC 6 Controller
Excellon Driller  
Model: EX 300 view details

get a quote
S/N:
3 Heads, 80k Bearing Spindles, 9 Tool Changers per Station, CNC 6 Controller
Excellon Driller/Router  
Model: EX 300 view details

get a quote
S/N: 090
4 Heads, 420 Spindles-40K, CNC-6 Controller
Excellon Driller/Router  
Model: Mark VI-C view details

get a quote
S/N:
CNC-6 Controller, 5-Head, 420 Spindles
Excellon Driller/Router  
Model: Uniline view details

get a quote
S/N:
Sun controller, TMS of 120 bits, 80k RPM Model ABWR spindle, 11/98
Film Storage Cabinets  
Model: view details

get a quote
S/N:
2 available

- On wheels
- 110 v
- slide out shelving units
Filotec Jump Score Unit  
Model: KSM 30 view details

get a quote
S/N:
With Sieb & Meyer controller (1999)
GARDIAN FLYING PROBE TESTER  
Model: G 60 2013 view details

get a quote
S/N:
GARDIAN TESTER 4 PROBER
2013 AND IN PERFECT RUNNING CONDITION

CAN BE SEEN RUNNING
Gerber / Crescent Photoplotter  
Model: CR30 view details

get a quote
S/N: 279
Year: 1994
Gerber Laser Photoplotter  
Model: Crescent 40 view details

get a quote
S/N:
- available w/ upgraded front end station
- drum style
GLENBROOK  
Model: RTX113 view details

get a quote
S/N:
Glenbrook x ray system
Grieve Oven  
Model: 333 view details

get a quote
S/N:
0 -250 F with 2 shelves, 3' x3' x 3' high interior dimension

Grieve Oven  
Model: 343 view details

get a quote
S/N:
0-350 F with 2 shelves, 3' x 4' x 3' high interior dimensions

Hakuto Auto Cutsheet Laminator  
Model: Mach 610i view details

get a quote
S/N:
Hakuto Cut Sheet Laminator  
Model: Mach 500 view details

get a quote
S/N:
18" Automatic Cut Sheet Laminator- Auto Centering
Hakuto Cut Sheet Laminator  
Model: Mach 600 view details

get a quote
S/N:
24'' Automatic Cut Sheet Laminator- Auto Centering
Hitachi CO2 Laser Driller  
Model: LCO-1A21E/10C view details

get a quote
S/N: K810548006
Auto Load & Unload
s/n: K810548006 (1998) Air: Water Cooled
Hitech Exposure Unit  
Model: 106L view details

get a quote
S/N:
8kw, Double Drawer, Built in Water Cooling, Large Format 43"x 55" Frame Size
Hoffman  
Model: 30 hp Vacuum System view details

get a quote
S/N:
Hollmuller D/E/S Line  
Model: view details

get a quote
S/N:
- Configured in a "U" shape currently.

- This line can be put into one continuous line, or any other configuration.

- Cupric etch system.

Call us for details!
Hollmuller Etcher  
Model: view details

get a quote
S/N:
(2002)
Small footprint
Thin material capable
Thin line capable
Can be set up for cupric, ferric or ammonia
Hollmuller Resist Strip / Ammonia Etch / Tin Strip  
Model: Fabrication # 3043/1-15 view details

get a quote
S/N:
Model Year: 2002
Fabrication # 3043/1-15
Voltage: 480v / 3Ph / 60Hz / 150 Amps / 110kW
Single Air Conditioned NEMA 3 Door Control Cabinet
Fully Automated - PLC control.
Conveyor Width > 30
Speed 0.6-6.5 ft/min.
Max Temp: 145 F
Panel Dimensions: Max 30
Panel Thicknesses: 0.005 0.250
can do 2mil lines with Fineline manifold

Total Length of Line 36-10
I.S.  
Model: Devmaster 30" view details

get a quote
S/N:
Double Chamber with the following modules:

Input, Double Develop Chamber, Quad Rinse Cascade, Dryer & Exit
I.S.  
Model: Devmaster 24" view details

get a quote
S/N:
Includes the following modules:

Input, Main Develop Chamber, Quad Rinse Cascade, Dryer & Exit
I.S.  
Model: Stripmaster view details

get a quote
S/N:
30", Double Chamber with Drum Filter System and the following modules:
Input, Double Strip, Cascade Rinses, Dryer & Exit. (1997)
I.S.  
Model: Ammonia Etching System view details

get a quote
S/N:
24" with flood rinse, triple cascade rinse & dryer, (2001)
I.S. Flux Washer  
Model: view details

get a quote
S/N: 275148
30 " conveyor
Year 2001
2 brush unit
460 v
Separate control panel w/ Siemens PLC
I.S. Post Cleaner  
Model: view details

get a quote
S/N: 275148
30 " conveyor
Year 2001
2 brush unit
460 v
Separate control panel w/ Siemens PLC
I.S. Pumice Scrubber  
Model: Pumiflex view details

get a quote
S/N:
Siemens controller
I.S. Pumice Scrubber  
Model: Pumex view details

get a quote
S/N:
High Pressure Rinse, SHD Dryer, Thick Panel Option, Filtrex 2000, (1998)
I.S. Pumiflex w/ preclean  
Model: Pumiflex view details

get a quote
S/N:
Thick Panel Option, SHD Dryer, Filtrex 2000 Filter System
I.S. Scrubber  
Model: 24'' PUMEX view details

get a quote
S/N:
High Pressure Rinse, SHD Dryer, Set up for Aluminum Oxide or Pumice, Filtrex 2000 Filter System Included. Ready to Ship!!
I.S. Scrubber/Rinser/Dryer  
Model: Scrubbex view details

get a quote
S/N:
24 " Double Scrub Complete with with rinse ,dryer and filtering System (1998)
I.S. Scrubbing / Debur Machine  
Model: Scrubbex 2000 view details

get a quote
S/N: 0932137
4-Brush Deburr w/ Ultrasonics, Siemens Digital Controls, Serial No. 0932137 Including Three Phase Transformer 277/480 Volts
I.S. Scrubbing/Debur Machine  
Model: Scrubbex 2000 view details

get a quote
S/N: 0932137
4-Brush Deburr w/ Ultrasonics, Siemens Digital Controls, Serial No. 0932137 Including Three Phase Transformer 277/480 Volts
I.S. Soldermask Developer  
Model: Devmaster view details

get a quote
S/N:
- 24"
- Includes rinses
- Includes SHD dryer
Ishii Hyoki Scrubber  
Model: Aluminum Oxide view details

get a quote
S/N:
Includes preclean, jet scrub, high pressure rinse and dryer, fully rebuilt, (2000)
ITC Via Fill Machine  
Model: THP 30" view details

get a quote
S/N:
Max. Panel size: 610 mm x 762 mm (24 x 30")
Min. Panel Size: 200 x 200 mm (8 x 8")
Panel thickness: 0,25 - 10,00 mm (0.01 - 0.39")
Max. Panel weight: 8 kg (17.5 lbs)
Min. Hole size: 0,1 mm (0.004")
Kepro  
Model: BTE-402 view details

get a quote
S/N:
bench top etcher, vertical etcher. Great for lab or prototype use.
KlingeInberg Drilling Machines  
Model: MIC76K-6D view details

get a quote
S/N:
13 Available, 6-125k RPM Spindles, (11-2000, 2-1999)
Kuttler Loader  
Model: KEA60 view details

get a quote
S/N:
Kuttler Loader  
Model: RL160 view details

get a quote
S/N: 3463
Year 5/2004, 480V
Kuttler Loaders  
Model: RLE-102A view details

get a quote
S/N: 2475 & 2477
(2000), s/n 2475 & 2477
Lauffer Laminating Press System  
Model: SL80-2 Fast Cycle view details

get a quote
S/N: 18262
w/ Control Cabinet. - A rare opportunity to purchase the latest technology!
Maintech Preheater  
Model: 006 view details

get a quote
S/N:
6 heated rolls, 3 independant heater controls, 29'' rollers, 200 volt, 3 phase (1997)
Mania  
Model: Argos 850 view details

get a quote
S/N:
Single vision system with variable resolutions down to 0.2 mils. Material thickness up to 275 mils.

Inspection area up to 24 x 30.
Inspection speed up to 130 sides per hour (optimized 18x24 panel with 1 margin).
Mania Flying Probe  
Model: Speedy Model MPP-4504 view details

get a quote
S/N: 550389
4 probe with Hi-Ram software and calibration plate, (2000)
Mania Flying Probe Tester  
Model: Speedy 580 view details

get a quote
S/N:
(2004)
Mania Flying Probe Tester  
Model: Probot 880-05 view details

get a quote
S/N:
(2005), can handle down to .062 material. Great condition.
Mania Flying Probe Tester  
Model: Loc 8 view details

get a quote
S/N:
2004
Mania Precise Bare Board Tester  
Model: Precise 2S view details

get a quote
S/N: 2BB017
Grid size 16" x 19" top and bottom. Double density!!
Marseco Deburrer  
Model: HDDBS-2-30 view details

get a quote
S/N: 045012
2 brushes w/ High Pressure Rinse and Filter (1999)
Process parts 2"-24" in width, and 6" or longer in length.
Process parts 0.01" to 0.25" in thickness. 0.004" to 0.25" thickness
Marseco Scrubber/Rinser/Dryer  
Model: WSS2-24 view details

get a quote
S/N:
24'' Double Sided with 2 brushes and rinse with dryer
Process parts 2"-24" in width, and 6" or longer in length.
Process parts 0.01" to 0.25" in thickness. 0.004" to 0.25" thickness
Mass Via Fill Sander  
Model: SV 100 view details

get a quote
S/N:
Year: 2007
Vacuum Table: 31" x 31" 790 x 790 mm
Max. panel: 38" 960 mm
Max. panel: 30" x 30" / 760 x 760 mm
Precision of adj: 0.02 mil 0.5 m
Max. panel thickness: 0.6" 15 mm
Min. panel thickness: 2 mil 0.05 mm
Microcraft Flying Probe Tester  
Model: EMMA ELX6146 view details

get a quote
S/N:
Morton Dynachem Hot Roll Laminator  
Model: 300 view details

get a quote
S/N:
Includes Model 310 Vacuum Base, 24" Conveyor
Morton Tacky Roller Machine  
Model: Hi-Tac Cleaner-24 view details

get a quote
S/N:
double-sided with entrance and exit conveyor.
Multiline Artwork Punch  
Model: view details

get a quote
S/N: SAP-001
Semi-automatic
Multiline Auto Artwork Punches  
Model: view details

get a quote
S/N: AAP-0060, AAP-0063
Series 3000 Controller
Multiline Core Punch  
Model: Acculine view details

get a quote
S/N:
24"x24" Format, Standard .187 Offset
Multiline Post Etch Punch  
Model: view details

get a quote
S/N:
With 3000 controller
Runs on DOS
.188 standard offset configuration

Multiline Post Etch Punch  
Model: Optiline PE view details

get a quote
S/N: PC2-0041
- Semi Automatic
- Electrical: 3/60/230-460
Multiline Post Image Artwork Punch  
Model: view details

get a quote
S/N:
With:
-2 Panasonic Vision Systems
-Fiber-Lite Optic Light Sources
-Panasonic Monitors
Multiline Semi-automatic Artwork Punch  
Model: view details

get a quote
S/N:
Standard .188 offset
NEW Posalux Ultra Speed Driller (Demo Unit)  
Model: 6000-6D view details

get a quote
S/N:
- Year: 2012
- 12- 200,000 rpm spindles Model PX220S synchronous spindles
- 6 stations, each with two spindles mounted on a dual Z-axis direct drive
- Max panel size: 21.5" x 27.0'' (546 x 685 mm)
- CNC3000 controller with touch-sensitive flat screen
- Real time broken drill detection by contact drill
- Quick drill
- Software format: Excellon EX1 and EX2, S&M 1000, 3000 and 5000, Posalux
*1 year factory warranty includes parts and labor
NuArc Platemaker  
Model: FT40APRNS view details

get a quote
S/N:
Double-sided with digital controls
Nuarc Vacuum Frame  
Model: VF-DP view details

get a quote
S/N:
50'' x 62'', (1996)
Nubal Accumulator  
Model: view details

get a quote
S/N:
OEM 3 Opening High Temp Vacuum Press  
Model: view details

get a quote
S/N:
High temp
600 degrees F
Built in water
Olec Accuprint Exposure Unit  
Model: AP-30 Super 8 view details

get a quote
S/N:
8kw, Double Drawer, Built in Air Conditioning
rebuilt
Olec Accuprint Exposure Unit  
Model: AP-30-5000 view details

get a quote
S/N:
5kw, Double Drawer
OLEC Accuprint Expsoure Unit  
Model: AP30-6000 Titan view details

get a quote
S/N:
-6kw
-mylar frames
-double drawer
- 3 available
Optek 3-D Measuring Device  
Model: V2803 view details

get a quote
S/N:
Windows based operating system, granite base, x-y-z measuring.
OPTEK Vacuum Laminator  
Model: DPL 24 view details

get a quote
S/N:
Drawer Type
Detailed Specifications -
Substrate Size Up to 24" X 24" on a standard machine.Substrate Thickness Thicknesses from .001" to .375" a maximum height of .150".
Shipping Weight 2200 Lbs.
Dimensions 44" Wide X 44" Deep X 60" High
Utilities 220 VAC, 40 Amps/phase, 3 Phase 50/60HzDry air at 5.5 Bar (80 PSI), 142 L/m (5 CFM)
Vacuum An end point in excess of 2 Torr.

(30 seconds/Vacuum Dwell and 20seconds/Pressure Dwell).
Optek Video Measuring System  
Model: V2803 view details

get a quote
S/N: 451
Video Inspection and Measuring System
Optrotech Laser Photoplotter  
Model: Image 5008 view details

get a quote
S/N:
ORC Exposure Unit  
Model: HMW680GW view details

get a quote
S/N:
7kw, Double Drawer, Internal Cooling, New Bulbs, New Water Jackets and Mylar Frames.
ORC Exposure Unit  
Model: HMW 201B view details

get a quote
S/N:
3kw, Double Drawer, Built in Water Cooling
oxford cmi  
Model: 950 view details

get a quote
S/N: 2008

cmi 950 X-ray spectrometer: XRF
plating thickness, material composition
comes with pc ,printer ,dongle
manuals included
PEC Rectifier  
Model: 43TL-001M-012-XXXX view details

get a quote
S/N: 25201
-onboard controls
-input: 480 volts and output: 1,000 amp/12 volts
-ready to ship
Pluritec Driller  
Model: Single Spindle view details

get a quote
S/N:
Pluritec Single-spindle driller
Auto load and unload w/ cart,
Seib & Meyer controller
Includes heat exchanger"
120k rpm spindle"
Large tool management system"
Broken bit detector"
Pluritec Drills  
Model: Giga 8888 view details

get a quote
S/N:
Available, 8-125k RPM Spindles, (1999-2000)

Pluritec X-ray Driller  
Model: Inspecta view details

get a quote
S/N:
Single Head Sieb & Meyer controller
call us or email us for details
Pola e Massa Planarizer  
Model: Type: PLZ-650 view details

get a quote
S/N: 113A55.005
2004
Posalux Driller  
Model: Ultra 6000 view details

get a quote
S/N:
10 Available CNC 3000 controller
3 Available with 8 heads

CALL FOR DETAILS

Precision Quincy Oven  
Model: 40D-350 view details

get a quote
S/N:
Solder Mask Oven, 48" x 60" x 30" deep
Proheco Box Oven  
Model: HCFO-303642 view details

get a quote
S/N: 9-168-H
240 Volt, 3 Phase, 28 Amps
Digital Controls
Cross Flow Ventilation Osha Package
Inside Dimensions: 30" wide x 30" deep x 42" high
Radoll  
Model: Edgemate view details

get a quote
S/N:
Edge finishing unit
Radoll  
Model: Bevelmaster view details

get a quote
S/N:
Beveling Master
Radoll  
Model: Bevelmate view details

get a quote
S/N:
Beveling System
Rapid Rectifier  
Model: 500 Amp view details

get a quote
S/N:
Input 575 volt
Output 500 amp 6 volt
With controls
Air cooled

4 available
Schmid  
Model: Pre-Clean Line view details

get a quote
S/N:
1999
- Input
- chemical clean
- cascade rinse
- rinse
- double dryer
- exit
Schmid Combi-Line  
Model: Type 46 Develop/Etch/Strip Line view details

get a quote
S/N: 46-00-286, 21-00-285, 45-00-284
2H/H-80mil, 4m/minute, Modules:
- Entrance Conveyor, Dev.1, Dev. 2, Post Dev., Cascade Rinse, Inspection, Etcher 1, Etcher 2, Etcher 3, Etcher 4, Intermittent Spray, Acid Rinse, Cascade Rinse, Inspection, Pre-Strip, Strip, Strip, Post Strip, Cascade Rinse, Acid Rinse, Cascade Rinse, Exit Dryer & Conveyor - 24" Cap. Right to Left Configuration
- w/ Associated Dosing Tank, Replenish Tanks, Diaphragm Pumps, Motors, Filters, Control Cabinet w/ Computer Control
Schmid Combi-Line Pretreat Line  
Model: view details

get a quote
S/N:
24" Cap.
Right to Left Configuration
w/ Load Conveyor
Acid Rinse
DI Water Rinse
MEC Etch Bond
DI Water Rinse
Exit Dryer,
Unload Conveyor
Associated Motors, Pumps, Plumbing, Control Cabinet
Schmid DES Line  
Model: Combiline view details

get a quote
S/N:
-30"conveyor
-only 65' long in current configuration
-upgraded PC controller
-can handle down to 2 mil material successfully
-1998
-480 volt
-to be rebuilt and tested at our facility or buy as-is.
Sieren Ceco Hole Checker  
Model: HC 3W view details

get a quote
S/N: D-159
- PC controlled
- Software included on hard drive
- Year: 8/1999
Somaca Deburrer  
Model: WB 6224J view details

get a quote
S/N:
24'' Double Sided Deburrer- Oscillation, Rinse, Dryer
Somaca Scrubber/Rinser/Dryer  
Model: SBC 224L view details

get a quote
S/N:
24'' Double Sided
Spencer  
Model: view details

get a quote
S/N:
25 HP Dust Collector
Spencer Vacuum System  
Model: 5hp view details

get a quote
S/N: 303665
3470 RPM, 200v/3/60hz
Tadco Caul Plates  
Model: 4140 Alloy Steel view details

get a quote
S/N:
6 bushings in x axis and 4 bushings in the y axis. They are rounded slot holes and were used on a Multiline system.

Outer dimensions: 26" x 29"
Tadco Seperator Plates  
Model: 630 Stainless Steel view details

get a quote
S/N:
Outer Dimensions
21" x 27"
21" x 24"
20" x 26"
Teknek Tacky Roll Cleaning Machine  
Model: 24" wide conveyor view details

get a quote
S/N:
Model CM3 with input and output conveyor, many available
Teknek Tacky Roller  
Model: view details

get a quote
S/N:
Double-sided, w/ numerical counter, anti-static bars, conveyor speed adjustment, variable height, 110 volt, in line application & 27'' rollers
Teknek Tacky Roller  
Model: CM4 600RMD view details

get a quote
S/N: 5239
Year: 1996
Teknek Tacky Roller  
Model: CM50600LRF 6A / 110 / 60 view details

get a quote
S/N: 9544
(2001)double-sided, input and output conveyor, drawer style tacky roller access for quick change. Can be used as inline unit with conveyors removed
Teknek Tacky Roller 48"  
Model: CM5 view details

get a quote
S/N:
48" wide, 3 in stock, input and output conveyors available
Teledyne Hot Air Leveler  
Model: HALCO 175 view details

get a quote
S/N:
Horizontal Hot Air Solder Leveler
TMP Vacuum Press  
Model: view details

get a quote
S/N:
Electric heat
Seperate cold press
4 - 25"x25" platens
Ready to ship!
TMP Vacuum Press  
Model: view details

get a quote
S/N: 20207
- 140 ton
- 4 opening
- Electric heat
- 25" x 25" platen size
- Stand alone cold press
- Cold press can be behind or alongside
- Swing out front door
- Low profile
- Optional touch screen controls
- Siemens Simatic TI 505 PLC
- 208 voltage
VCM Vertical Developer  
Model: view details

get a quote
S/N:
- entrance, main chamber, cascade rinse, double dryer, exit
- double Penguin pumps
- Small footprints
Wesero Deburrer  
Model: 601 view details

get a quote
S/N: M10215
With Ultrasonics, High Pressure Rinse & Sand Filter
Wesero Scrubber/Deburrer  
Model: EC600 view details

get a quote
S/N: 504
Bag Filtration With Re-Circulating Rinse. High Pressure Module Option. (2000)

WISE  
Model: JETSTAR view details

get a quote
S/N: JMB 105018
wise jet pumice scrubber great machine for thin material transport
comes complete with acid cleaner and pumice separator unit .

2005 machine but in above average condition .
Zero Ion Ionic Contamination Unit  
Model: view details

get a quote
S/N:
-with printer port
-digital display and keypad
-large capacity
-110 volt
-with operations manual
Zero Ion Ionic Contamination Unit  
Model: view details

get a quote
S/N:
-with printer port
-digital display and keypad
-large capacity
-110 volt
-with operations manual
 View Paged 
  
go to cart »
Manufacturer: Chemcut
Part Number: 130985
Part Name: S-Wheel, 2" Black
more parts - click here »

Our Latest Equipment List
click here for PDF file

Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Email Newsletter
For Email Marketing you can trust

© 2010 Equipment Technologies, Inc. All Rights Reserved.
EquipTech.com is a service mark of Equipment Technologies, Inc.
Web design by: Digital Media Design, Inc.